Embedded Files
DESCRIPTION
Dymonic® 100 is a high-performance, high-movement, single-component, medium-modulus, low-VOC, UV-stable, non-sag polyurethane fire rated sealant. Dymonic 100 is a durable, flexible sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured.
BASIC USES
Typical applications for Dymonic 100 include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, doors, and panels), aluminum, masonry and vinyl siding. Dymonic 100 is also an excellent choice as a fluid applied flashing material in rough opening perimeters for fenestration/window, door and curtain wall applications.
Dymonic 100 can be used in UL listed Fire Stopping assemblies (FF-D-1186, FW-D-1117, HW-D-1122, WW-D-1200, and BW-S-0006).
FEATURES & BENEFITS
Can adhere to damp or green concrete and has a skin time of 2 hr with a tack-free time of 6 to 8 hr to significantly reduce dirt attraction.
Movement capability of +100/-50% in typical field conditions, is low VOC, paintable, jet fuel-resistant, and will not crack, craze or yellow under extreme UV exposure.
Suitable for water immersion and will not out gas
Compatible and can be coated over with Tremco’s Vulkem Deck Coatings, ExoAir Air Barrier products and the cold, fluid-applied TREMproof line of below-grade waterproofing products.
ASTM C920 Type S, Grade NS, Class 50, Use NT, T, M, A, O, I
U.S. Federal Specification TT-S-00230C, Class A, Type II
CAN/CGSB-19,13-M87
International Code Council (ICC) Section R703.8 Flashing
AAMA 714-15 Specification for Liquid-Applied Flashing
NFPA 285 Listed Component
Page updated
Google Sites
Report abuse